Re: Front Wheel Bearing 1958 Coupe
Posted: Thu Sep 13, 2018 9:32 am
In what way, Jay?
+1,David Jones wrote: ↑Sat Sep 08, 2018 11:34 pm Peter, I was under the impression that the wheel bearings changed with the advent of the stronger stub axles with the model change from 58 to 59 and the change was from ball to roller bearings and the discontinuation of the 2 nuts with locking tab a la VW and the switch to the locking clamp nut. The obvious way to tell early from late is that the left side was a left hand thread and the right side was RH thread and on the later stub axle both sides are RH thread. I thought the diameter of the bearings was the same just the change from ball to roller bearings and of course nothing is interchangeable. It is not from my experience unusual to have difficulty removing the inner race from the stub axle and I have resorted to brute force and a chisel on occasion. The inner race of the inner bearing is a very tight fit but will often times come off with only a little persuasion.
Brad Ripley may be the best source on which bearing is correct. but I think it will depend on which stub axles you have. They are interchangeable.