356A coupe driver side inner fender fabrication
- Tom Nelson
- 356 Fan
- Posts: 20
- Joined: Thu Jun 14, 2012 1:04 pm
- Location: Raleigh, NC
- Contact:
356A coupe driver side inner fender fabrication
This morning we fabbed up the inner rear wheel housing for a 356A coupe we are working on to replace the rusty metal with fresh. The one photographed is our third attempt...
1959A Super Coupe-matching numbers
1958 Convertible D-matching numbers
1958A Normal cabriolet-matching numbers
1967 912 Soft Window Targa-matching numbers
1970 914-6-matching numbers
Our website: www.tjauto-inc.com
"Esse quam videri"
1958 Convertible D-matching numbers
1958A Normal cabriolet-matching numbers
1967 912 Soft Window Targa-matching numbers
1970 914-6-matching numbers
Our website: www.tjauto-inc.com
"Esse quam videri"
-
- 356 Fan
- Posts: 4205
- Joined: Tue Mar 25, 2008 9:28 pm
Re: 356A coupe driver side inner fender fabrication
See http://www.restoration-design.com/store/product/PP185AL and the right side http://www.restoration-design.com/store/product/PP185AR for Speedster but you might be able to use with modification on your A Coupe.