1959 A interior rear garnish rail removal?
-
John Lindstrom
- 356 Fan
- Posts: 336
- Joined: Mon Oct 23, 2017 9:51 am
- Location: Stanford, Ca. USA
1959 A interior rear garnish rail removal?
I can get it loose and wiggle it on one end but the other end does not seem to want to come out. Is there a hidden screw on these or how does this trim piece come out?
Last edited by John Lindstrom on Sun Jun 24, 2018 5:52 pm, edited 1 time in total.
-
Doug McDonnell
- 356 Fan
- Posts: 6079
- Joined: Sat Apr 05, 2008 8:21 am
- Location: Augusta,Michigan
Re: 1959 A interior rear metal side trim removal?
Garnish rail? If front screw removed tap upwards a little then pull forwards.
1965 356C 2000 BMW 740i Sport 1967 Honda CL77 There is never enough time to do it right, but always enough time to do it over.
-
John Lindstrom
- 356 Fan
- Posts: 336
- Joined: Mon Oct 23, 2017 9:51 am
- Location: Stanford, Ca. USA
Re: 1959 A interior rear garnish rail removal?
I can’t seem to locate the screw, it must be hidden well. My wife says that if there were little curly hairs on it, that I would find it immediately.
-
Doug McDonnell
- 356 Fan
- Posts: 6079
- Joined: Sat Apr 05, 2008 8:21 am
- Location: Augusta,Michigan
Re: 1959 A interior rear garnish rail removal?
Peel back your door rubber trim in the appropriate area.
1965 356C 2000 BMW 740i Sport 1967 Honda CL77 There is never enough time to do it right, but always enough time to do it over.
-
John Lindstrom
- 356 Fan
- Posts: 336
- Joined: Mon Oct 23, 2017 9:51 am
- Location: Stanford, Ca. USA
Re: 1959 A interior rear garnish rail removal?
Thanks Doug!
- 0207985F-9A2E-4DDA-BF40-20C30DB7C34C.jpeg (24.82 KiB) Viewed 409 times