Just had to ask, can you lift a 356c from the bumper mounts? I was thinking about bolting something across to 2 mounts and lifting the car with my tractor as high as I can without the other side hitting the ground, so I can blast the underside outside. And yes I know I can warp the sheetmetal it if not careful...
There is no engine in, or interior, but it does have the transmission in and wheels on. I don't want to bend anything...
Bill
Silly question
-
Bill Lawless
- 356 Fan
- Posts: 955
- Joined: Mon Oct 25, 2010 10:17 pm
- Location: Northern Vermont
Silly question
Thanks,
Bill
65' 356 SC Cab Irish Green
82' SC Targa
81 VW Westfalia with 2015 Forester Engine
BMW 64'-R50/2, 75'-BMW R90/6, 74' BMW R90/6, Yamaha BW350
Bill
65' 356 SC Cab Irish Green
82' SC Targa
81 VW Westfalia with 2015 Forester Engine
BMW 64'-R50/2, 75'-BMW R90/6, 74' BMW R90/6, Yamaha BW350
-
Eric Wills
- 356 Fan
- Posts: 136
- Joined: Thu Mar 27, 2008 10:54 am
- Location: Fairfax, VA
- Contact:
Re: Silly question
It can be done. I am assuming you are removing the transmission before media blasting. If not, you may want to think that over.
Eric Wills