help
-
- 356 Fan
- Posts: 2
- Joined: Tue Dec 26, 2017 11:05 pm
help
im restoring a 356 b t6, and working on rocker area, anyone know the correct placement or measurements for welding in a new jack plate, or location
- Doug McDonnell
- 356 Fan
- Posts: 6084
- Joined: Sat Apr 05, 2008 8:21 am
- Location: Augusta,Michigan
Re: help
viewtopic.php?f=1&t=37372 and from rocker: viewtopic.php?f=1&t=31934
1965 356C 2000 BMW 740i Sport 1967 Honda CL77 There is never enough time to do it right, but always enough time to do it over.
-
- 356 Fan
- Posts: 79
- Joined: Mon Jan 23, 2017 11:53 am
- Location: southwest florida
Re: help
Ron Rolands book suggest you measure up one inch from door bottom then measure along threshold 8 inches to center of jack spur. For B & C. Just finished the passenger side on 64 c t-6. Used the orginal spurs which needed work. The after market were really bad. They fit nicely, like they are suppose to. Measures 3/8 inch from rocker. Good luck.