Hi all
I would like to take apart my ignition switch and give it a clean/service. Could someone kindly guide me,should I grease the contacts? If so, which grease should I use dielectric, conductive carbon grease etc.
Anything else I should be aware of before taking apart the switch. (1959 356a)
Regards
Ignition switch grease
-
- 356 Fan
- Posts: 125
- Joined: Tue Apr 15, 2008 1:09 am
- Location: Sydney Australia
- John Brooks
- 356 Fan
- Posts: 2169
- Joined: Tue Jul 08, 2008 11:50 am
- Location: Whidbey Island WA.
- Contact:
Re: Ignition switch grease
Peter
Couple drops of oil or graphite on the key lock. Don't try to take it apart.
Send it out, that's hard to get apart and there is a 80% you will break the plastic tabs or the switch. There are several vendors that can overhaul the switch and replace the brass contacts if that's what you need.
Couple drops of oil or graphite on the key lock. Don't try to take it apart.
Send it out, that's hard to get apart and there is a 80% you will break the plastic tabs or the switch. There are several vendors that can overhaul the switch and replace the brass contacts if that's what you need.
John Brooks
62 Roadster
66 912
84 Cab
getting pushed around in porsches since 1965
62 Roadster
66 912
84 Cab
getting pushed around in porsches since 1965
- Jules Dielen
- 356 Fan
- Posts: 3204
- Joined: Fri Mar 28, 2008 3:25 pm
- Location: Arizona
Re: Ignition switch grease
There was a guy with an aluminum 'precision oiler' at the swap meet. Looked like a ballpoint pen with a pointy tip that only dropped a single drop of oil every time. That would be the perfect tool to lube an ignition switch or door lock without making a big mess.
Jules
Water pumps are for windshield washers only.
Water pumps are for windshield washers only.
- Daniel Roman
- 356 Fan
- Posts: 50
- Joined: Thu Mar 23, 2017 9:00 pm
- Location: South Florida
Re: Ignition switch grease
Graphite is not recommended for locks. Graphite is a particulate and will only add more material to the gunk already within. Petroleum based products and oils become tacky with time. Also, adding lubricants, even the correct type will only work for so long. Cleaning and lubing is a good start. However, if you are experiencing any issues with the ignition, there are underlying issues that need to be addressed that are beyond lubrication. Lastly, mixing lubricants is never good.
PTFE based lubricants and 100% Silicone based lubricants resist thermal breakdown, maintain their viscosity and do not gum up. They also inhibit corrosion.
We can service your lock if you are having trouble with it.
Hope this helps,
Alicia and Dan
PTFE based lubricants and 100% Silicone based lubricants resist thermal breakdown, maintain their viscosity and do not gum up. They also inhibit corrosion.
We can service your lock if you are having trouble with it.
Hope this helps,
Alicia and Dan
TWEETS Restorations -- For all of your lock and key needs
DRROCKETDAN@gmail.com
Member: 914World 914Club PelicanParts TheSamba Early911sRegistry 912bbs Rennlist
DRROCKETDAN@gmail.com
Member: 914World 914Club PelicanParts TheSamba Early911sRegistry 912bbs Rennlist
-
- 356 Fan
- Posts: 125
- Joined: Tue Apr 15, 2008 1:09 am
- Location: Sydney Australia
Re: Ignition switch grease
Thank you all for your replies.
Just to make it clear Im not having troubles with the lock. I thought it would be a good idea just to clean/service the contacts as a preventitive measure.
Just to make it clear Im not having troubles with the lock. I thought it would be a good idea just to clean/service the contacts as a preventitive measure.
- John Brooks
- 356 Fan
- Posts: 2169
- Joined: Tue Jul 08, 2008 11:50 am
- Location: Whidbey Island WA.
- Contact:
Re: Ignition switch grease
That is the part of cleaning the switch that get you in trouble, the back is staked in place to the pot metal portion of the switch. It's takes practice and tooling to disassemble and separate the electrical portion of the switch. If you get that far, replace the brass contacts and switching parts.
Send it out. If not you will probably end up buying a new switch, then getting the doors re keyed.
Send it out. If not you will probably end up buying a new switch, then getting the doors re keyed.
John Brooks
62 Roadster
66 912
84 Cab
getting pushed around in porsches since 1965
62 Roadster
66 912
84 Cab
getting pushed around in porsches since 1965
-
- 356 Fan
- Posts: 1123
- Joined: Wed Apr 02, 2008 9:49 pm
- Location: Gilroy, CA
Re: Ignition switch grease
Jules, wasn't that you selling the cool oil pens? I bought one from you and have used it twice, once add oil to the distributor felt, and the other reaching way inside a housing on the wood stove blower motor, worked perfect.
- Sebastian Gaeta
- 356 Fan
- Posts: 3055
- Joined: Tue Mar 25, 2008 5:50 pm
- Location: Ann Arbor, MI
Re: Ignition switch grease
The ignition switch on my cab would sometimes not engage until I retreated it slightly from full turn. I figured the contacts were worn out so I sent it to Dick Weiss. We were both surprised to learn that the contacts were fine, they were just slobbered with too much grease. A good cleaning and testing and it was sent back good to go.
Sebastian Gaeta
www.arbormotion.com
Registry #8339
'65 C coupe
'64 C cab
-------
2014 Boxster 981
2005 997 C2 Cab
1967 Karmann Ghia Convertible
1966 VW Single Cab
1966 Ducati Cafe Racer
1964 Karmann Ghia Coupe
1963 Beetle
www.arbormotion.com
Registry #8339
'65 C coupe
'64 C cab
-------
2014 Boxster 981
2005 997 C2 Cab
1967 Karmann Ghia Convertible
1966 VW Single Cab
1966 Ducati Cafe Racer
1964 Karmann Ghia Coupe
1963 Beetle