The Official 356Talk Forum

Quick question before I drill How far below the rear deck lid opening is the top of the letters. Too the holes which are 4” wide is an inch and a half or an in and 3/4 the correct space?

Hi Chris
Obviously the original holes have been filled. My suggestion is to solicit a couple of Resto Shops. Give them the production info on your car as well as how many mounting pins on your script and ask them to make you a paper template. I expect most of the respected restorers in our orbit would do this for a nominal fee. This would result in a much more satisfying outcome than having some "smart guy" at a cars and coffee on some future date saying, "hey, isn't that script a little low"
C.

You might be able to reach up and feel for Bondo worms but a template would be better.

Mike

Well after eyeballing it numerous times from pics I decided on what looked right. Drilled holes that seemed like going into body putty. Couldn't believe it was perfect. I usually get it right the 3rd time:)

Congrats! Nothing like progress!

Mike

Now take precise measurements and publish for the next person with the same question.

Was the mounting strip still there on the inside of the nose?

This was rear Jules. Not on nose.

There's a strip for the rear as well.

Mike

All,
Measurements for all the script locations is documented in Kellogg's 356 Restoration book
Jim Kellogg

I am the world expert on doing things 3 or more times. Never hire me by the hour. .............Jim.