I am not sure of the correct name for these, they are the on/off ducts for the Euro Heater. Mine are in pretty good condition, but I would like to get them refinished. Looking under the clamps at each end, I see shiny metal, it appears these were originally zinc plated. Either that or they were painted silver. Any opinions on the subject?
-Dave
Euro Heater Air Valves - Refinishing
-
- 356 Fan
- Posts: 2189
- Joined: Sat Oct 26, 2013 9:34 pm
- Location: Monterey, CA
-
- 356 Fan
- Posts: 221
- Joined: Thu Jan 15, 2009 4:01 pm
- Location: Sydney, AUSTRALIA
Re: Euro Heater Air Valves - Refinishing
Hi Dave, Some time back I posted a photo of a NOS kit of these parts. Found it again, so here it is. The Valves are plated.
download/file.php?id=29151&mode=view
Hope this helps, jim
download/file.php?id=29151&mode=view
Hope this helps, jim
-
- 356 Fan
- Posts: 2189
- Joined: Sat Oct 26, 2013 9:34 pm
- Location: Monterey, CA
Re: Euro Heater Air Valves - Refinishing
Thanks Jim, that nails it. I appreciate your help.jim saunders wrote:Hi Dave, Some time back I posted a photo of a NOS kit of these parts. Found it again, so here it is. The Valves are plated.
download/file.php?id=29151&mode=view
Hope this helps, jim
Dave