Hey. Rebuilding my Zenith 32 NDIX's.
Question regarding accelerator pumps.
Left one is on the rebuild kit
Right one is the existing
Which is correct ? Short end of the shaft looks different. Length is different.
If I use the one in the kit do I just add a cotter pin ?
Thank you !!!!
Gus
Zenith Carb 32 NDIX correct accel pump ?
- Gus Borner
- 356 Fan
- Posts: 144
- Joined: Sun Apr 20, 2008 2:13 pm
- Location: Burbank, CA
Zenith Carb 32 NDIX correct accel pump ?
______________________
Gus Borner
1960 T5 B Cab 153079 Aqua Blue/Red
1961 T5 B Coupe 116920 Fish Silver Gray/Orange Stripes-Outlaw
1961 T5 B Coupe Electric Conversion
Gus Borner
1960 T5 B Cab 153079 Aqua Blue/Red
1961 T5 B Coupe 116920 Fish Silver Gray/Orange Stripes-Outlaw
1961 T5 B Coupe Electric Conversion
- Bruce Smith
- 356 Fan
- Posts: 1624
- Joined: Sun Jun 19, 2011 9:47 am
- Location: Rochester, NY
- Contact:
Re: Zenith Carb 32 NDIX correct accel pump ?
Gus,
Take the cardboard tube off the end. Are they the same length? The ones below are correct and the kit should have a pin. Shorter ones will pump too much fuel.
Take the cardboard tube off the end. Are they the same length? The ones below are correct and the kit should have a pin. Shorter ones will pump too much fuel.
Bruce Smith
- David Jones
- Classifieds Moderator
- Posts: 7342
- Joined: Tue Mar 25, 2008 6:32 pm
- Tag: I wish I knew as much as I think I know.
- Location: Kentucky
Re: Zenith Carb 32 NDIX correct accel pump ?
If you have a pump that is too short you can dismantle them and use your old pump shaft with the new diaphragm.
If I had known I would live this long I would have pushed the envelope a little harder.
Cymru am byth
David Jones #9715
Cymru am byth
David Jones #9715
- Bruce Smith
- 356 Fan
- Posts: 1624
- Joined: Sun Jun 19, 2011 9:47 am
- Location: Rochester, NY
- Contact:
Re: Zenith Carb 32 NDIX correct accel pump ?
Good point David but I think his old one might be the short one.
Bruce Smith