The Official 356Talk Forum

After cleaning up as much I could by hand I used a paint remover

The bare metal looks really good besides little surface rust on the sides

What should I use to neutralize the rust prior primer?
Antonio

Rear section almost done
Antonio

Hi Antonio. Check out the POR15 product line. It will work nicely for your project. Mark

Thanks

I have used Por15, great product but I will use a epoxy primer on this project.


Antonio

mark bibler wrote:Hi Antonio. Check out the POR15 product line. It will work nicely for your project. Mark

It clean up really well, rear section already has a layer of primer

Before and after
Still have a lot of glue to be remove but slow I will get there. The front section where the floor panels were replaced, I will need to seal all the welds prior apply the primer , can any one sugest what to use ?






Antonio

Sikaflex? 5200? 3M4000? Try this site: https://www.jamestowndistributors.com/u ... &page=GRID let me know what you end up choosing. Also, what product did you choose for the epoxy primer?

Thanks for the help and info

I end up ordering the SEM Products Dual-Mix Seam Sealer

I am still cleaning but I most ready to apply the seam sealer , I will use tape to make a neat job

On the primer I will get the name
Antonio

John Lindstrom wrote:Sikaflex? 5200? 3M4000? Try this site: https://www.jamestowndistributors.com/u ... &page=GRID let me know what you end up choosing. Also, what product did you choose for the epoxy primer?

Primer is on and getting painted soon

Will be home by June then the fun starts

Time to start looking for the new Black interior and Black top

Antonio

Hello

My car did not come with the bumper guards on the front or rear

Wife wants them and my job is to make it happen LOL

Where can I get 4 Bumper Guard, I was thinking using 4 (front ones) I dont need with holes in the rear, already chrome would be great

Antonio

Stoddard has nice reproductions but decent used ones can be found if your wife is willing to be patient.
http://www.stoddard.com/64450530115-nla.html

Thanks, I book marked Stoddard on my 356 for future orders

Because I am keeping the old patina on the chromes, used one would look much better

Antonio

David Jones wrote:Stoddard has nice reproductions but decent used ones can be found if your wife is willing to be patient.
http://www.stoddard.com/64450530115-nla.html

Don't make too nice to drive.

I know , I am sure I will not have that problem

Thomas Sottile wrote:Don't make too nice to drive.

Is the outside painted yet? Pictures?

Chuck

Yes , after year 1/2 LOL

Charles H Jacobus wrote: ↑Fri Aug 03, 2018 5:17 pm Is the outside painted yet? Pictures?

Chuck