Anyone have experience with this pivoting throttle linkage bracket on an early linkage car? Here's a video of the part on my 56 Coupe:
https://www.dropbox.com/s/p59elq8thq72r ... t.mov?dl=0
I believe this is the reason why I'm only getting about two thirds of full throttle. Haven't removed it yet to investigate the cause of the wobble.
Front Linkage Bracket On 56 Is Loosey Goosey
-
- 356 Fan
- Posts: 102
- Joined: Sun Apr 27, 2008 2:20 am
- Location: San Francisco, CA
-
- 356 Fan
- Posts: 392
- Joined: Thu Feb 23, 2017 12:41 am
- Location: So Cal
Re: Front Linkage Bracket On 56 Is Loosey Goosey
Pull the cotter pin and pop off the ball linkage and remove it.
Then check it out to see what is loose or worn out.
Martin
Then check it out to see what is loose or worn out.
Martin
- Doug McDonnell
- 356 Fan
- Posts: 6084
- Joined: Sat Apr 05, 2008 8:21 am
- Location: Augusta,Michigan
Re: Front Linkage Bracket On 56 Is Loosey Goosey
Might be the same as on Steve Harrison's 55 see page 5 of this link: viewtopic.php?f=4&t=21404&start=60 If it is then ask him for a photo of how he did his.
1965 356C 2000 BMW 740i Sport 1967 Honda CL77 There is never enough time to do it right, but always enough time to do it over.