I have not opened the engine latch release on my 1959 356A in many moons and now it will not open.
Pull knob in rear seat area pulls out but hatch does not open.
Any ideas?
engine hatch release
- Vic Skirmants
- Registry Hall of Fame
- Posts: 9304
- Joined: Tue Oct 27, 2009 5:02 pm
- Location: SE Michigan
- Contact:
Re: engine hatch release
James; welcome.
Maybe the lid is stuck. Have somebody pull up on the lid while you pull the release.
Maybe the lid is stuck. Have somebody pull up on the lid while you pull the release.
-
- 356 Fan
- Posts: 2
- Joined: Mon May 22, 2017 4:33 pm
Re: engine hatch release
thanks I will try that
- Doug McDonnell
- 356 Fan
- Posts: 6084
- Joined: Sat Apr 05, 2008 8:21 am
- Location: Augusta,Michigan
Re: engine hatch release
James you should have an emergency access hole as shown in this thread: viewtopic.php?f=1&t=42681
1965 356C 2000 BMW 740i Sport 1967 Honda CL77 There is never enough time to do it right, but always enough time to do it over.
-
- 356 Fan
- Posts: 338
- Joined: Tue Mar 25, 2008 6:14 pm
Re: engine hatch release
Have someone pull release cable and try pulling up gently as mentioned by Vic. If that doesn't work try pushing down lightly on lid above the mechanism while someone is pulling cable and it should pop up when you release it. If not you can try the emergency hole below and fish around till you catch the release and can pop it open. Might lube mechanism and shorten the cable at mechanism, i.e. pull it tighter but not too much or it won't lock.
Michael Foster
Michael Foster
MICHAEL FOSTER