Hello all
Looking for resources on removing horn ring and or light flash button on the steering wheel.
My horn ring is very loose for some reason and when driving the horn goes off on its own.
I have the Technical restoration guide 1 and 2 but could not find this procedure in the books, i also would like to get the
button to work as a light flash to .
My Car is 58 A coupe 104120 6 volt
Thank you for your time and help in advance for this project
Herlin Woolery
Help on removing Horn ring
- Herlin E. Woolery
- 356 Fan
- Posts: 167
- Joined: Thu Mar 27, 2008 8:45 pm
- Location: Ontario, Calif.
- Doug McDonnell
- 356 Fan
- Posts: 6084
- Joined: Sat Apr 05, 2008 8:21 am
- Location: Augusta,Michigan
Re: Help on removing Horn ring
I have never owned an A but found this: viewtopic.php?f=1&t=2201
1965 356C 2000 BMW 740i Sport 1967 Honda CL77 There is never enough time to do it right, but always enough time to do it over.
- Herlin E. Woolery
- 356 Fan
- Posts: 167
- Joined: Thu Mar 27, 2008 8:45 pm
- Location: Ontario, Calif.
Re: Help on removing Horn ring
Thank You will check it out
- Jim Clement
- 356 Fan
- Posts: 1476
- Joined: Tue Oct 26, 2010 10:46 am
- Tag: 1957 356 A Coupe
- Location: Calgary Alberta
Re: Help on removing Horn ring
i just use a stiff wire through the two holes on the back side of the steering hub ??
- Herlin E. Woolery
- 356 Fan
- Posts: 167
- Joined: Thu Mar 27, 2008 8:45 pm
- Location: Ontario, Calif.
Re: Help on removing Horn ring
Ok Jim probably use a coat hanger
-
- 356 Fan
- Posts: 11
- Joined: Tue Nov 18, 2014 9:16 pm
- Location: Grand Rapids MI
Re: Help on removing Horn ring
1/8" drift
- Mike Wilson
- Classifieds Monitor
- Posts: 11637
- Joined: Tue Apr 15, 2008 4:37 pm
- Location: SW Los Angeles
Re: Help on removing Horn ring
Once off, do a Google search on the topic of the horn ring/button. Ed Rutherford has fixed several loose/non-op rings with a rubber ring and posted the process.
Also, be careful removing the button as excessive force will crack the Bakelite/plastic.
Also, be careful removing the button as excessive force will crack the Bakelite/plastic.
Mike Wilson
Lomita, CA
'63 B coupe
Lomita, CA
'63 B coupe