turn signal installation
- Jim Clement
- 356 Fan
- Posts: 1476
- Joined: Tue Oct 26, 2010 10:46 am
- Tag: 1957 356 A Coupe
- Location: Calgary Alberta
turn signal installation
does any one know the specific screw size for the two screws that hold the turn signal mechanism to the housing ?
- Jim Clement
- 356 Fan
- Posts: 1476
- Joined: Tue Oct 26, 2010 10:46 am
- Tag: 1957 356 A Coupe
- Location: Calgary Alberta
Re: turn signal installation
a picture of the housing.. and the switch that i need to find two screws for..
-
- 356 Fan
- Posts: 233
- Joined: Sun May 11, 2008 2:31 pm
Re: turn signal installation
I bought some of these screws from Wolfsburg West. They were also used on VW turnsignal switches. www.wolfsburgwest.com
-
- 356 Fan
- Posts: 197
- Joined: Sat Mar 29, 2008 1:11 pm
- Location: Texas
Re: turn signal installation
Jim,
Try this: type356a,com/blinkerswitch.HTML I was scanning this website the other day and I believe he proudly claimed the reproduction of these very hard to find screws. I just passed over it as I have a C coupe so of course I couldn't be bothered.
Hope this helps.
Jim Learmonth
Houston, TX
Try this: type356a,com/blinkerswitch.HTML I was scanning this website the other day and I believe he proudly claimed the reproduction of these very hard to find screws. I just passed over it as I have a C coupe so of course I couldn't be bothered.
Hope this helps.
Jim Learmonth
Houston, TX
-
- 356 Fan
- Posts: 4207
- Joined: Tue Mar 25, 2008 9:28 pm
Re: turn signal installation
I believe those screws are 3 x 10 DIN 84 see https://www.mcmaster.com/#91460a115/=16fxxqq
- Jim Clement
- 356 Fan
- Posts: 1476
- Joined: Tue Oct 26, 2010 10:46 am
- Tag: 1957 356 A Coupe
- Location: Calgary Alberta
Re: turn signal installation
Thanks
I could only find 3 x 6 or 8.. but they worked just fine.. and now it works much better !!
I could only find 3 x 6 or 8.. but they worked just fine.. and now it works much better !!