Need to examine Weber

356 Porsche-related discussions and questions.
Message
Author
User avatar
Phil Planck
356 Fan
Posts: 2030
Joined: Wed Mar 26, 2008 7:21 pm
Location: NE Michigan, lower penn.

Re: Need to examine Weber

#16 Post by Phil Planck »

Ashely

Nice job on your custom filters. Here is the left side throttle arm that came on my Weber equipped 912. I think they are now NLA.
Attachments
P6121226.JPG
Phil Planck

User avatar
DonCichocki
356 Fan
Posts: 521
Joined: Thu Aug 22, 2013 4:29 pm
Location: Lafayette, NJ

Re: Need to examine Weber

#17 Post by DonCichocki »

Interesting throttle actuating arm, looks like the bellcrank that's mounted to the side of the transmission.

User avatar
Ron LaDow
356 Fan
Posts: 8092
Joined: Wed Mar 26, 2008 11:45 am
Location: San Francisco

Re: Need to examine Weber

#18 Post by Ron LaDow »

With thanks to all of you, I got a shot of the first-article on the new plates with the spring perches.
1st filter adapter.jpg
It uses Solex PII return springs, with the coil at the top.
I should have them in hand in a week or so.
Ron LaDow
www.precisionmatters.biz

User avatar
Greg Bryan
356 Fan
Posts: 3679
Joined: Sat Oct 04, 2008 1:05 pm
Location: San Pedro, CA 90732; Fallen Leaf, CA 96150
Contact:

Re: Need to examine Weber

#19 Post by Greg Bryan »

That's very nice!
But if you only had an avatar.....
Greg Bryan

User avatar
Ron LaDow
356 Fan
Posts: 8092
Joined: Wed Mar 26, 2008 11:45 am
Location: San Francisco

Re: Need to examine Weber

#20 Post by Ron LaDow »

Greg Bryan wrote:But if you only had an avatar.....
I've been meaning to deal with that, but just haven't found the time. And more time. And more time yet. And....
Ron LaDow
www.precisionmatters.biz

Post Reply