Hi, need some help to get my 356 PreA 55 speedster horn working, I was wondering if someone skilled from the forum would have the wiring diagram and some steering wheel, column and horn diagram ???
Many thanks
Chris
356 Speedster horn wiring diagram
- Christophe Goncalves
- 356 Fan
- Posts: 29
- Joined: Tue May 20, 2008 4:44 am
- Mike Wilson
- Classifieds Monitor
- Posts: 11637
- Joined: Tue Apr 15, 2008 4:37 pm
- Location: SW Los Angeles
Re: 356 Speedster horn wiring diagram
Chris: does your car have the horn button only or horn button with horn ring?
Horn button only (per Joe Leoni's book)
Black/yellow wire from fuse #3 to Batt on horn relay which jumps to HB on relay.
Blue wire with black tracer from #54 on relay to the slip connection (brush) on the steering column.
From that slip connection, a black wire with yellow tracer to the horn button itself. Ground is made when the horn button is depressed.
If you have a horn ring:
Black wire from contact #85 on the light signal relay to the carbon brush on the steering column
The horn button is connected to the light signal relay with a black wire to flash the lights.
To sound the horn, the wiring from the horn relay goes by way of the other carbon brush to the connection for the horn ring. Ground is accomplished when you depress the ring.
Guys: If I messed this up, PLEASE correct me! I'm just looking at Joe's diagram and not at a car.
Mike Wilson
Lomita, CA
'63 B coupe
Horn button only (per Joe Leoni's book)
Black/yellow wire from fuse #3 to Batt on horn relay which jumps to HB on relay.
Blue wire with black tracer from #54 on relay to the slip connection (brush) on the steering column.
From that slip connection, a black wire with yellow tracer to the horn button itself. Ground is made when the horn button is depressed.
If you have a horn ring:
Black wire from contact #85 on the light signal relay to the carbon brush on the steering column
The horn button is connected to the light signal relay with a black wire to flash the lights.
To sound the horn, the wiring from the horn relay goes by way of the other carbon brush to the connection for the horn ring. Ground is accomplished when you depress the ring.
Guys: If I messed this up, PLEASE correct me! I'm just looking at Joe's diagram and not at a car.
Mike Wilson
Lomita, CA
'63 B coupe
Mike Wilson
Lomita, CA
'63 B coupe
Lomita, CA
'63 B coupe
- Jim Liberty
- 356 Registry Member
- Posts: 4320
- Joined: Tue May 06, 2008 3:47 pm
- Tag: Jim
- Location: Orange Co., CA
- Contact:
Re: 356 Speedster horn wiring diagram
That's it Mike, Chris buy an A wiring diagram from Greg Bryan, our Moderator. It is the best one out there, and a must have.
....................................................................................Jim.
....................................................................................Jim.
Jim Liberty
- Mike Wilson
- Classifieds Monitor
- Posts: 11637
- Joined: Tue Apr 15, 2008 4:37 pm
- Location: SW Los Angeles
Re: 356 Speedster horn wiring diagram
Thanks for the confirmation, Jim.
Chris, as a 356 owner, there are a number of books you need to have on hand and, as Jim indicated, a wiring diagram from Greg is certainly another item.
Mike Wilson
Lomita, CA
'63 B coupe
Chris, as a 356 owner, there are a number of books you need to have on hand and, as Jim indicated, a wiring diagram from Greg is certainly another item.
Mike Wilson
Lomita, CA
'63 B coupe
Mike Wilson
Lomita, CA
'63 B coupe
Lomita, CA
'63 B coupe
- James Davies
- 356Talk Moderator
- Posts: 2959
- Joined: Thu Aug 15, 2013 9:15 am
- Location: Heidelberg, DE
Re: 356 Speedster horn wiring diagram
There's a Speedster wiring diagram on pages L10 and L11 of the 1954 Porsche service manual. It shows a dual horn setup with a relay. Does yours have a relay?
If yours has only a single horn and no relay, then I expect it would be the same as for a '53 car - one wire from horn button brush to horn, the other wire from horn to fuse block at #3 or #4. You can see the '53 setup in drawing 0356.61.027. Also much better in Greg Bryan's lovely '53 diagram.
If yours has only a single horn and no relay, then I expect it would be the same as for a '53 car - one wire from horn button brush to horn, the other wire from horn to fuse block at #3 or #4. You can see the '53 setup in drawing 0356.61.027. Also much better in Greg Bryan's lovely '53 diagram.
-
- 356 Fan
- Posts: 348
- Joined: Tue Oct 26, 2010 2:21 pm
Re: 356 Speedster horn wiring diagram
This is one step better than a diagram
http://cyberwerkstatt.com/Members_Only/ ... 2_Horn.htm
And it kinda fun!
ed
klasse356
http://cyberwerkstatt.com/Members_Only/ ... 2_Horn.htm
And it kinda fun!
ed
klasse356
-
- 356 Fan
- Posts: 98
- Joined: Sun Apr 20, 2008 1:18 pm
Re: 356 Speedster horn wiring diagram
Hi Chris,
I was just restoring a set of horns and wanted to check with you about your none working set of horns.
Did you get your set of horns working?
You can call me if you want 770-337-5936 and I can try to talk you through some check points.
Or you can send them to me.
Regards
Julian
I was just restoring a set of horns and wanted to check with you about your none working set of horns.
Did you get your set of horns working?
You can call me if you want 770-337-5936 and I can try to talk you through some check points.
Or you can send them to me.
Regards
Julian
- Mike Wilson
- Classifieds Monitor
- Posts: 11637
- Joined: Tue Apr 15, 2008 4:37 pm
- Location: SW Los Angeles
Re: 356 Speedster horn wiring diagram
Trust me, Chris, he is the BEST for horn repair and restoration.
Mike Wilson
Lomita, CA
'63 B coupe
Lomita, CA
'63 B coupe