Head lamp conversion H4 headlamp with LED 6 volt bulb

[Peter Poulikakos]

PM your phone number it be easier to communicate if you like

[David Jones]

Richard, the 6 to 12 volt converters I used are shown as not available on Amazon but that has happened before. They are similar to these by the same manufacturer. There are similar ones for sale but these were half the price of the others with the same rating.
https://www.amazon.com/Converter-DROK-V ... KZZG7Z9ZA7
Difference was in the output they are 12 volt/10 amp. I used two so as to be safe, one for high beams and one for low beams.

[Richard Colella]

Like the black globes. Here’s what I have:

E4F93A4A-7A69-4B7C-814D-5DF01AAA51D5.jpeg (1.6 MiB) Viewed 1701 times

5E29F8A6-63DE-4D8A-9DD8-A397014822C5.jpeg (1.92 MiB) Viewed 1701 times

[Peter Poulikakos]

20181021_193100.jpeg (58.14 KiB) Viewed 1696 times

Ok
That will work as that is what i have in my 356. If your headlights have the small cup reflectors you might have to bend or remove them. My headlights dont have the small cup reflector.

[Martin Benade]

So you have regular H-4s , not LED s?

[Peter Poulikakos]

The picture you see is with the led globes fitted. H4 led as per the black globes pictured in previous post.

[Martin Benade]

I meant Richard’s bulbs.

[Richard Colella]

Martin, yes I have h4 bulbs but want to convert to LEDs.

[Peter Poulikakos]

Just to make it clear these are 6 volt only globes. Not 12 volt.

[Peter Poulikakos]

Sorry Martin.
Didn't notice the author of the post

[Richard Colella]

Peter, how’s the beam on those? Good cutoff lines, etc?

[Peter Poulikakos]

All i can say is that they are much brighter than what i had and make driving at night safer.
Maybe Merv can comment on the cut off lines as he is using the same globes.

[Peter Poulikakos]

Im happy to send you a pair of globes. If you are not happy send them back and i will refund your money less shipping.
You will definitely see the difference.

[Richard Colella]

Peter, just sent you an email.

[Richard Colella]

I just pinged Pete at CDRC (http://www.dynamoregulatorconversions.com/) to get an update on their 6V H4 LED redesign. I asked when they might be available and he responded:

At this moment it’s difficult to say.
I have a design on paper but we want to build bulbs that don’t have an external driver.
With 6v this presents a problem that we are trying to address.
At the moment we can’t get samples made up due to coronavirus.

Just in case others might be interested.....