Hello,
When i bought my car, the body had already been restored but the beehive tail lights were not placed at the right position.
So, i want to move them as they should be.
Does anybody have a plan or information concerning the precise position, including the distances between them.
I want to know the horizontal and the vertical positions.Thanks for your help.
Best Regards from France.
Frederic DUMONT
Porsche 356 A T1 1955 - 55355
The right position of the beehive tail lights on a T1 model
- Frederic Dumont
- 356 Fan
- Posts: 11
- Joined: Tue Apr 01, 2008 8:26 am
- Location: France
The right position of the beehive tail lights on a T1 model
Best Regards
Frederic DUMONT - Porsche 356 A T1 - 55355
356Registry member
Frederic DUMONT - Porsche 356 A T1 - 55355
356Registry member
-
- 356 Fan
- Posts: 499
- Joined: Tue Jul 08, 2008 3:17 pm
- Barry Brisco
- 356 Fan
- Posts: 3977
- Joined: Sun Mar 09, 2008 4:41 pm
- Tag: Porsche enthusiast
- Location: San Francisco
- Contact:
There are 20 posts on that page, many of them meaningless chit chat, so you will have to scroll through the entire page to extract any potentially useful information, which seems to be the following (I'm only quoting this, can't verify its accuracy):Thomas Canty wrote:This might help:
http://www.thesamba.com/vw/forum/viewtopic.php?t=277558
beehive light hole sizes, main hole is 30mm dia, mount holes are 53mm apart and its 85mm between the lights going by the main hole...The outer lights are slightly higher than the inners (~.75"). All dimensions are from centerline to centerline.