The driver's seat adjustment lever in my '64 C Coupe recently snapped off at the threads used to secure the knob. This is the lever that is used to adjust the fore and aft seat location as shown in the photo below I scraped from another post.
I obtained a replacement lever plus some extra clevis pins from EASY (thank you Jim Breazeale) and had the lever re-chromed. Before I start taking things apart, I wonder if someone out there has affected this replacement and if so has any advice as to the best way to go about it.
Thanks in advance!
Replacing the Seat Adjustment Lever
- Michael Hodos
- 356 Fan
- Posts: 173
- Joined: Thu Jun 26, 2008 1:41 am