What type & size of tires to use / what fits? / "best" tire?
- Richard Sjolund
- 356 Fan
- Posts: 206
- Joined: Fri Mar 28, 2008 4:40 pm
- Location: Iowa - USA
- Contact:
Re: What type & size of tires to use / what fits? / "best" t
Anyone know anything about the Tire Rack 165/80 "Classic" tire? They are $75.72 each at Tire Rack
Richard
https://www.tirerack.com/tires/tires.js ... toModClar=
Richard
https://www.tirerack.com/tires/tires.js ... toModClar=
-
- 356 Fan
- Posts: 1898
- Joined: Sat Jun 21, 2008 11:16 am
- Location: Santa Monica, CA
Re: New Tire Recommendations from Porsche Classic
Picked up my CN36 tires today. They are made in Germany. Things have dragged on with my car. But I hope driving is near.Edwin Ek wrote:Mark, these tires are made in Italy by Pirelli. At least for the time being ... Very nice and reassuring to hear that they are such good tires. I bet you were wearing out the rears three times as fast.
Pirelli tires for your bicycle? Like to hear more about that.
Scott, my car is emerging from a lengthy storage and should be on the road within a few months. I will wait to buy tires until it is truly ready to go. Sometimes things drag on.
#6386
-
- 356 Fan
- Posts: 38
- Joined: Mon Feb 09, 2009 10:04 am
Wheels/tires
Good morning,
Could someone please tell me if Porsche made 5.5 X 15" wheels for '60Bt5, or were they all 4.5"? Also, can 5.5" tires go on 5.5" wheels? Thank you,
Bill Daugherty
Could someone please tell me if Porsche made 5.5 X 15" wheels for '60Bt5, or were they all 4.5"? Also, can 5.5" tires go on 5.5" wheels? Thank you,
Bill Daugherty
-
- 356 Fan
- Posts: 38
- Joined: Mon Feb 09, 2009 10:04 am
Wheels/tires
Good morning,
Could someone please tell me if Porsche made 5.5 X 15" wheels for '60Bt5, or were they all 4.5"? Also, can 5.5" tires go on 5.5" wheels? Thank you,
Bill Daugherty
Could someone please tell me if Porsche made 5.5 X 15" wheels for '60Bt5, or were they all 4.5"? Also, can 5.5" tires go on 5.5" wheels? Thank you,
Bill Daugherty
- Doug McDonnell
- 356 Fan
- Posts: 6084
- Joined: Sat Apr 05, 2008 8:21 am
- Location: Augusta,Michigan
Re: Wheels/tires
5.5x15 wheels came later during 912/911 times. A lot of the aftermarket Brazilian chrome rims were 5.5x15 also. Many use them on 356s. From the factory 356s came with 4.5x15 rims although earlier cars had other rims. BT5 would have come with 4.5x15 rims
1965 356C 2000 BMW 740i Sport 1967 Honda CL77 There is never enough time to do it right, but always enough time to do it over.
- Greg Bryan
- 356 Fan
- Posts: 3696
- Joined: Sat Oct 04, 2008 1:05 pm
- Location: San Pedro, CA 90732; Fallen Leaf, CA 96150
- Contact:
Re: Wheels/tires
Bill - I'm going to move your question to the Tire 'sticky' thread - there are 22 pages of tire and wheel questions and answers
viewtopic.php?f=1&t=27101
As for your question, as far as I know, production cars in 1960 all had 4.5" rims, but, in the spirit of never say never, there may have been special models or options for wider wheels.
viewtopic.php?f=1&t=27101
As for your question, as far as I know, production cars in 1960 all had 4.5" rims, but, in the spirit of never say never, there may have been special models or options for wider wheels.
Greg Bryan
- Jon Schmid
- 356 Fan
- Posts: 1801
- Joined: Thu Jun 26, 2008 4:32 pm
- Location: La Mirada, CA
Re: Wheels/tires
I'm virtually certain 4.5 inch wheels were all that were factory offered. If you go 5.5 inch, I highly recommend you keep the spare at 4.5 inches if my cars are any indication of the fit.
- Paul Lima
- 356 Fan
- Posts: 509
- Joined: Fri Jan 10, 2014 2:02 pm
- Location: Gardnerville, NV
Re: Wheels/tires
I have 5.5" wheels on my BT5; needs 10 mm spacers on the rear. Snug fit but it works.
-
- 356 Fan
- Posts: 1981
- Joined: Sun Jan 31, 2010 6:50 pm
- Location: Union, New Jersey
Re: Wheels/tires
The 4.5" wheels were not only standard throughout the 356 series but also used on the early 911 and 912s. The 5.5" rims became available some time afterwards and can be used on most 356 series cars, utilizing 165, 175, 185 or even 195 tires, although I wouldn't recommend anything more than 185.
- Adam Wright
- Classifieds Monitor
- Posts: 10321
- Joined: Wed Mar 12, 2008 1:00 am
- Tag: KTF
Re: Wheels/tires
The 5.5's came out mid-68. Though I think they were making both for awhile because I have several wheels of both 4.5 and 5.5 that have the same date.Geoff Fleming wrote:The 4.5" wheels were not only standard throughout the 356 series but also used on the early 911 and 912s. The 5.5" rims became available some time afterwards and can be used on most 356 series cars, utilizing 165, 175, 185 or even 195 tires, although I wouldn't recommend anything more than 185.
www.unobtanium-inc.com
Check out my Barn Find column in the Registry magazine, always looking for good stories.
Check out my Barn Find column in the Registry magazine, always looking for good stories.
-
- 356 Fan
- Posts: 11
- Joined: Mon Feb 06, 2017 8:39 pm
Re: What type & size of tires to use / what fits? / "best" t
question for a 59' A coupe
Does anyone know if a Vredestein Spring Classic 175/70-15 on a 5.5" Tecnomagnesio wheel (or steel brazilian 5.5")
will fit in the trunk?
(sorry pressed send too soon)
Thanks
Does anyone know if a Vredestein Spring Classic 175/70-15 on a 5.5" Tecnomagnesio wheel (or steel brazilian 5.5")
will fit in the trunk?
(sorry pressed send too soon)
Thanks
59' 356 A coupe
- Mike Richardson
- 356 Fan
- Posts: 4
- Joined: Tue May 20, 2008 2:26 pm
- Tag: Resistance is not futile: R=v/i
- Location: Salinas, CA
Re: What type & size of tires to use / what fits? / "best" t
First, I'll admit I haven't read all the posts in this thread, but I figure I need to reply to one of the early ones: the post talked about carrying a "repair kit" for a flat that didn't involve taking the tire and rim off the car. That kit usually involves pushing a "plug" saturated with adhesive into the tire. Unfortunately, when you push the plug in, it's always MUCH wider than the offending object that caused the flat, and will sometimes cause a rupture of the belts - radial or not. Once the belt is ruptured, the plug is just along for the ride, and will, almost assuredly, fly out with a lot of help from the pressurized tire interior. When that happens, you'll get a very fast flat, and a ruined tire. My suggestion is: have a tire shop fix the flat by taking the tire off the rim and applying a patch on the inside of the tire. And, if you have a flat fixed on any car you own, pay attention to how that flat is repaired. If they start to put in a plug, stop them. Either they patch or you go someplace else.
Mike Richardson
Registry Member #4631
1963 'B' (T6) Karmann coupe 210171
Champagne Yellow
Calif. License CCCLVIB
Registry Member #4631
1963 'B' (T6) Karmann coupe 210171
Champagne Yellow
Calif. License CCCLVIB
- Martin Benade
- 356 Fan
- Posts: 12390
- Joined: Wed Nov 23, 2011 10:52 am
- Location: Cleveland, Ohio
Re: What type & size of tires to use / what fits? / "best" t
I agree that a plug is far from ideal, but in actual practice they almost always work fine. If you don't think too much about the tawdry details, they will hold the air in.
Cleveland Ohio
62 Cabriolet
56 VW
02 IS 300
04 Sienna
62 Cabriolet
56 VW
02 IS 300
04 Sienna
- Keith Lee
- 356 Fan
- Posts: 61
- Joined: Tue Jul 22, 2014 12:14 am
- Location: Alberta
Re: What type & size of tires to use / what fits? / "best" t
My tires are past their best before date and need to be replaced sometime in the near future.
I have Lemmerz chrome rims dated 1/65 on the T6B
My speedo reads about 7% high with the current 165R15 tires that are on it
Actual (GPS verified) speed at 3500 RPM is 111 KPH (69 MPH for the metrically challenged).
Questions:
Is the speed to RPM about what you guys experience?
Are my rims 4.5" or 5.5"? My best guess is 5.5" but can't measure very well with the tires on.
Has anyone tried 185HR15?
Current tires are 25.4" tall and the 185HR15 are (edit)26.25" tall. That would help with my speedo calibration and give me a little more speed at the same RPM. Fine by me.
Will they fit in the rear wheel well?
Any opinions welcomed.
I have Lemmerz chrome rims dated 1/65 on the T6B
My speedo reads about 7% high with the current 165R15 tires that are on it
Actual (GPS verified) speed at 3500 RPM is 111 KPH (69 MPH for the metrically challenged).
Questions:
Is the speed to RPM about what you guys experience?
Are my rims 4.5" or 5.5"? My best guess is 5.5" but can't measure very well with the tires on.
Has anyone tried 185HR15?
Current tires are 25.4" tall and the 185HR15 are (edit)26.25" tall. That would help with my speedo calibration and give me a little more speed at the same RPM. Fine by me.
Will they fit in the rear wheel well?
Any opinions welcomed.
Last edited by Keith Lee on Wed Jul 05, 2017 12:14 am, edited 1 time in total.
The primary obstacle to discovery is not ignorance, but the illusion of knowledge.
- Daniel Boorstin
- Daniel Boorstin
-
- 356 Fan
- Posts: 1898
- Joined: Sat Jun 21, 2008 11:16 am
- Location: Santa Monica, CA
Re: What type & size of tires to use / what fits? / "best" t
Speed to rpm relationship is normal.
You can measure the width of your wheels by taking one off, placing a straight edge on the rim edges on both sides, and measuring through the center hole.
Many, many owners run 185 tires front and rear. They don't fit up front as a spare tire.
Shorter tires mean less circumference, so less distance traveled per revolution.
You can measure the width of your wheels by taking one off, placing a straight edge on the rim edges on both sides, and measuring through the center hole.
Many, many owners run 185 tires front and rear. They don't fit up front as a spare tire.
Shorter tires mean less circumference, so less distance traveled per revolution.
#6386