Hi,
the shop installing the windshield on my t 5 cab says they are having a problem getting it in. apparently the chrome trim pieces pop out. I got the rubber seal from Stoddard. Have there been posts before about there seal being too thick and needing to be trimmed?? any help appreciateed.
al kuresman
windshield install
- al kuresman
- 356 Fan
- Posts: 120
- Joined: Sat Mar 29, 2008 11:08 am
- Location: Brentwood, CA (eastbay)
- Thomas Sottile
- 356 Fan
- Posts: 1535
- Joined: Wed Mar 26, 2008 3:02 pm
- Location: Stamford CT
- Contact:
windshield
If they lubricated the track for the moulding it will not stay in.
-
- 356 Fan
- Posts: 21
- Joined: Mon May 19, 2008 12:18 pm
- Location: San Francisco/Bay Area
windshield install
I imagine there are variations on all the pieces avaialble from all vendors but I just had my T-5 coupe windshield replaced with a NLA/Stoddard seal and glass and it came out perfectly with no problems or trimming required. Make sure your installer is experienced in doing these. I believe the trim goes in the seal before installing the assembly in the car, for whatever it's worth......
Good Luck
Eric
Good Luck
Eric