356ers,
The Koni steering dampner adjustment instructions are less than clear to me. There was a recent post about the dampners being factory set at low (soft) and the need to adjust to medium. How is that done?
Jim Beam
'63B Coupe
Koni steering dampner
-
- 356 Fan
- Posts: 405
- Joined: Sat Mar 29, 2008 3:23 pm
- Location: Albuquerque, New Mexico
Koni steering dampner
The Koni steering damper follows the the same rules as their shocks. The
one difference is that one part of their body does need to be kept
downward and this is clearly marked with a sticker. At its softer
setting is is about 25% stiffer than the stock Boge damper and the full
on setting is at least 100% stiffer than stock. They adjust the same way
as the suspension shocks, they just have a linear adjustment.
Alan
Jim Beam wrote:
one difference is that one part of their body does need to be kept
downward and this is clearly marked with a sticker. At its softer
setting is is about 25% stiffer than the stock Boge damper and the full
on setting is at least 100% stiffer than stock. They adjust the same way
as the suspension shocks, they just have a linear adjustment.
Alan
Jim Beam wrote:
Post generated using Mail2Forum via email.356ers,
The Koni steering dampner adjustment instructions are less than clear
to me. There was a recent post about the dampners being factory set at
low (soft) and the need to adjust to medium. How is that done?
Jim Beam
'63B Coupe
-------------------- m2f --------------------
To contact an administrator admin@356registry.com
<mailto:admin@356registry.com>
To unsubscribe go to http://www.356registry.com/forum/m2f_usercp.php
Read this topic online here:
http://356registry.com/forum/viewtopic.php?p=6232#6232
-------------------- m2f --------------------