Page 1 of 1
356 GT / Carrera Plexiglas Window Kit Price?
Posted: Tue Oct 06, 2009 9:30 pm
by Marc Allingham
Looking for some guidance on a fair price for a new set of reproduction Plexiglas windows.
Set includes:
Kit Includes:
* Plexiglas Left and right Door Windows
* Leather Window Pull Straps, Location Pin and Base Clamp Left and right Doors
* Plexiglas Left and Right Quarter Windows
* Correct Rear Quarter Window Rubber Seals
* Polished Stainless Steel Quarter Windows Hinges and Hardware
* Plexiglas Molded Rear Window
Plexiglass has:
* Polished Bull Nose Edges
* Reproduction Plexiglas Logo with 233 D-10 stamped on all Windows
* Polished Stainless Steel Hardware
* Period Correct Aluminum mounting Clamps and Location Pins
* Original Style Leather Window Pull Straps
GT Window Kit
Posted: Thu Oct 08, 2009 1:51 am
by David Rennie
Well I paid too much for a set of plexi windows that arrived with no logo or hinges or pull straps or alloy pegs.
I paid from a UK supplier about:
Pegs cost about $50
Straps cost about $80
Windows cost about $350
Normal window rubbers $20
I had to use my old hinges and cut all holes etc to fit them.
I asked about the logos but still not been sorted and thats almost a year gone.
Plexi
Posted: Thu Oct 08, 2009 6:52 am
by Bil Brown
I make/sell Plexi windows with the proper "Plexiglas 233 ~~~D-10" logo heat-stamped in place. My prices are: full door windows 50-59 $135/pr........door windows 60-65 $120/pr........door vent windows $45/pr.......rear quarter windows $85/pr......rear window 50-61 $195.........T6 rear $300........leather pull-up straps $75/pr........alum pegs $25/pr. I might even have a Speedster Plexi window left. I use 3/16" acrylic for all windows. Use your original hinges for the Plexi rear quarter windows...........bb#467 (0\I/0)
Posted: Thu Oct 08, 2009 8:57 am
by Jim Nelson
I think Marc is trying to see if this is a good deal...
http://cgi.ebay.com/ebaymotors/Porsche- ... 712wt_1167
Seems full, pricewise
plexiglass windows
Posted: Thu Oct 08, 2009 9:58 am
by Tom Tate
Russ has done it again, as he states, those are a "work of art". I can't imagine the time and effort that it took to produce those pieces. They may not be in your budget but you have to thank guys like Russ for going the extra mile to support out hobby. My guess is that he won't sell 10 sets per year but did it anyway because there was a market. We have the best vendors of any marque. KTF
356 GT / Carrera Plexiglas Window Kit Price?
Posted: Thu Oct 08, 2009 11:48 am
by Norm Miller
David,
Fear not!
My 59 GT came with NO logo's on the plexiglas.
So not all GT's had the logo. It also does not have the spacers on the rear ΒΌ windows.
Norm
Post generated using Mail2Forum via email.
Posted: Thu Oct 08, 2009 1:35 pm
by Joey Bautista
Just echoing what Tom had mentioned. Russ Rodriguez is a real stand up guy who is very passionate with his craft. I have some of the Plexi glass items mentioned above on my car.
The little details that other people tend to overlook does not escape him.
Kudos to Russ & Fibersteel !
Russ Rodriguez
Posted: Thu Oct 08, 2009 8:24 pm
by Charlie White
Russ Rodriguez's company, Fibersteel, also makes
Glasspar Hardtops for 356 Porsches under license from the original Glaspar Company. Contact: Russ Rodriguez at (626) 334-0404 or Email:
russ@fibersteel.com. See additional information on these Glaspar Hardtops at my website at:
http://derwhites356literature.com/356Po ... dtops.html
Scroll down to the section on Fibersteel.
Charlie White
Scottsdale, Arizona