Need torsion bar rubber bushings

Message

Jack Biersdorff · #1 Post by **Jack Biersdorff** » Thu May 01, 2008 7:11 pm

Folks

I am in need of the 2 rubber bushings at the end of each rear torsion bar, 4 total, 644.333.131.00. These have the smooth outer rim for a 1963B.

Thanks in advance.

Jack Biersdorff
1963 Sunroof 124917
Hollister California

Jerry Haussler · #2 Post by **Jerry Haussler** » Fri May 02, 2008 1:34 pm

i recently installed a stock set from NLA. there are also other types available that give more of a "sporty" feel as well as the full race versions.
HTH
jerry

Chuck House · #3 Post by **Chuck House** » Fri May 02, 2008 2:32 pm

Use the stock rubber ones on a street car unless you want squeaks and
more road noise transmitted. Also use graphite as a lubricant on the
rubber bushings to avoid squeaking.

Regards,

Chuck

-----Original Message-----
From: jerry haussler [mailto:registryforum@zephyrblau.com]
Sent: Friday, May 02, 2008 10:35 AM
To: 356talk@356registry.com
Subject: [356Talk] Re: Need torsion bar rubber bushings

i recently installed a stock set from NLA. there are also other types
available that give more of a "sporty" feel as well as the full race
versions.
HTH
jerry

Post generated using Mail2Forum via email.