Folks
I am in need of the 2 rubber bushings at the end of each rear torsion bar, 4 total, 644.333.131.00. These have the smooth outer rim for a 1963B.
Thanks in advance.
Jack Biersdorff
1963 Sunroof 124917
Hollister California
Need torsion bar rubber bushings
- Jack Biersdorff
- 356 Fan
- Posts: 47
- Joined: Wed Apr 23, 2008 6:43 pm
Need torsion bar rubber bushings
Please remove Jack Biersdorff from site as he has passed away. Thank you.
- Jerry Haussler
- 356 Fan
- Posts: 243
- Joined: Fri Apr 04, 2008 12:12 pm
- Location: S.F. Bay Area
- Chuck House
- Registry Hall of Fame
- Posts: 731
- Joined: Wed Mar 19, 2008 3:26 pm
Need torsion bar rubber bushings
Use the stock rubber ones on a street car unless you want squeaks and
more road noise transmitted. Also use graphite as a lubricant on the
rubber bushings to avoid squeaking.
Regards,
Chuck
-----Original Message-----
From: jerry haussler [mailto:registryforum@zephyrblau.com]
Sent: Friday, May 02, 2008 10:35 AM
To: 356talk@356registry.com
Subject: [356Talk] Re: Need torsion bar rubber bushings
i recently installed a stock set from NLA. there are also other types
available that give more of a "sporty" feel as well as the full race
versions.
HTH
jerry
Post generated using Mail2Forum via email.
more road noise transmitted. Also use graphite as a lubricant on the
rubber bushings to avoid squeaking.
Regards,
Chuck
-----Original Message-----
From: jerry haussler [mailto:registryforum@zephyrblau.com]
Sent: Friday, May 02, 2008 10:35 AM
To: 356talk@356registry.com
Subject: [356Talk] Re: Need torsion bar rubber bushings
i recently installed a stock set from NLA. there are also other types
available that give more of a "sporty" feel as well as the full race
versions.
HTH
jerry
Post generated using Mail2Forum via email.
Chuck House
Southern California
Southern California